Korenix JetNet 2005f-s: Ei-hallittava 5-porttinen (1x yksimuoto-kuituportti) Ethernet-teollisuuskytkin

JetNet 2005f, the rugged unmanaged Ethernet fiber switch as a quality and cost-effective solution for your important image transmission on high-end IP cameras. JetNet 2005f, the 5-port unmanaged Ethernet fiber switch outstands from other entry-level switches for the following features:

1. High Transmission Quality
   3.2Gbps Switch Fabric with excellent data exchange performance ensures your video deliver to destination without traffic congestion.
2. Slim and Rugged Design
   JetNet 2005f's Slim design saves space for a compact system. IP31 rugged aluminum casing can withstand the wide operating temperature -10~70oC under severe conditions. Redundant power input DC 18~32V serves your power backup and port alarm relays port status for instant maintenance.
3. IP Camera Loss Alarm
   JetNet 2005f provides one relay output for port link down events, which is enabled/disabled by the DIP switch. By connecting the relay output to a alarm, administrators will be informed once the attached IP camera crashed due to any unexpected event happens such as outward attack or system shutdown.
4. Cost-Effective Solution
   JetNet 2005f is the cost-effective solution with the best price/performance ratio among other brands providing the entry-level switches.

JetNet 2005f are ideal solutions for building surveillance, parking lot surveillance, hotel surveillance, retail surveillance, gas station surveillance, utility surveillance,  farm surveillance and so on.

Technology
Standard	IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3u 100Base-FX IEEE802.3x flow control
Switch Technology	Store and forward technology and with 3.2Gbps switch bandwidth
Aggregate System Throughput	1.49Mpps
Interface
Number of Ports	4 x 10/100 Base-TX with Auto MDI/MDI-X function, 1 x 100Base-FX
Connectors	10/100 Base-TX: RJ-45 100Base-FX: Duplex SC Power / Relay: 4-pin terminal block
Cables	RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters. SC connector: supports multi-mode or single-mode optical fiber. Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM
Fiber Transceiver	JetNet2005f-m, Multi-mode: 2KM max. distance Wave-length: 1310nm Min Tx Power:-19dBm Max Tx Power:-14dBm Min Rx Sensitivity:-30dBm Link budget:11dBm JetNet2005f-s, Single-mode: 30KM max. distance Wave-length:1310nm Max Tx Power:-8dBm Min Tx Power:-15dBm Min Rx Sensitivity:-34dBm Link budget:19dBm
Port Alarm DIP Switch	DIP 1~5: Enable or disable port link down alarm for copper port 1~4, fiber port 5 On: Enable port link down alarm Off: Disable port link down alarm
Diagnostic LED	System: Power (green), Fault (red) RJ-45 port: 100Mbps Link (green on)/Activity(green blinking) 10Mbps Link (yellow on)/Activity(yellow blinking) Fiber port: Link/Activity(Green)
Power Requirements
System Power	2 pins terminal block for power input. DC 24V(12~48V)with reverse polarity protection.AC 18~36V, 47~63Hz
Power Consumption	5.3Watts @ DC 24V
Mechanical
Installation	DIN-Rail mount
Casing	IP-31 protection, aluminum case
Dimensions	111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip) 111.8mm(H) x 30mm (W) x 89.4mm (D) ( without DIN rail clip)
Weight	377g with package 295g without package
Environmental
Operating Temperature	-10 to 70°C (regular version) -40 to 75°C (wide temperature version)
Operating Humidity	0% to 90% (Non-condensing)
Storage Temperature	-40 to 80°C
Storage Humidity	0%~ 90% non-condensing
Regulatory Approvals
EMI	FCC Class A, CE/EN55022
EMC Immunity Interface	EN61000-4-2: 6Kv Contact, 8Kv Air, ESD contact indirect 6kv EN61000-4-3: 10V/m, 80 MHz - 1 GHz, AM 1 KHz, 80% modulation,10V/m, 0.9 - 1.8 GHz, FM 200 Hz, 50% modulation EN61000-4-4: PWR Supply Lines:+/- 2KV,Communication Lines:+/- 2KV EN61000-4-5: 2KV on power line (L-N), 4KV on power line (L-PE, N-PE), 1.2uS Tr/ 50uS Th EN61000-4-6: PWR Supply Lines:10 Vrms, 150 KHz - 80 MHz;AM 1 KHz, 80% modulation; Communication Lines:10 Vrms, 150 KHz - 80 MHz;AM 1 KHz,80% modulation;Relay:10 Vrms, 150 KHz - 80 MHz;AM 1 KHz, 80% modulation EN61000-4-8: 50Hz, 3A/m EN61000-4-11: 30% 10 ms,60% 100 ms, > 95% 5000 ms
Safety	CE/EN60950
Shock	IEC60068-2-27 shock: 50 g, 11ms, 4g, +/- X, +/- Y, +/- Z
Free Fall	IEC60068-2-32 free fall:90 cm, 1 corner, 3 edges, 6 faces
Vibration	IEC60068-2-6 vibration: 1 mm, 2 Hz - 13.2 Hz, 90 min.; 0.7g, 13.2 Hz - 100 Hz,90 min.; 3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz,10 cycles, 1 octave/min