Korenix JetWave 2620: Dual IEEE 802.11a langaton tukiasema/silta ulkotiloihin integroidulla 23 dbi antennilla

JetWave 2620, Dual IEEE 802.11a IP67 Wireless Outdoor AP, is an ideal solution to long-distance wirelss surveillance seeking to extend wireless coverage with more bandwidth requirement. JetWave 2620 extends the wireless coverage to 40km. In addition to CSMA (Carrier Sense Multiple Access), the mostly used wireless transmission technology, JetWave 2620 implements Intel TDMA technology for longer wireless delivery without compromising the bandwidth. With a default 23dbi panel antenna, the wireless extensibility can reach at least 40KM with guaranteed transmission quality. Key features of JetWave 2620 are:

1. Dual Interface Doubles Bandwidth JetWave 2620 adopts dual 802.11a modules for users to aggregate radio. The link aggregation technology doubles the throughput of point to point application. Thus, users can benefit from the dual 5G bandwidth for more video streams and transmit megapixel and HDTV videos more efficiently.
2. Intel TDMA Enlarges the Coverage and Performance Intel TDMA is digital transmission technology that allows a number of users to access a single radio-frequency (RF) channel by allocating unique time slots to each user. By preventing collision problem, JetWave 2620 can extend video transmission to more than 40km with guaranteed quality.
3. IEEE 802.11a While IEEE 802.11b/g is more widely accepted in homes, enterprises, and hotspots, the IEEE 802.11a 5G band is less popular so there is less congestion to cause interference or signal contention. JetWave 2620 adapts IEEE 802.11a for longer distance and higher performance.
4. WMM (Wi-Fi Multimedia) designed for quality wireless surveillance, JetWave 2620 supports WMM which allows the wireless communication to give the highest priority to multimedia streaming. Video is given precedence over data packets and is delivered more efficiently even under limited bandwidth.

JetWave 2620 is powered by PoE. Along with JetPoE and JetRock series, Korenix provides the total solution to surveillance where wired infrastructures can not be easily reached, such as highway surveillance, railway surveillance, tunnel surveillance, dam surveillance, mining surveillance, harbor/port surveillance, wind farm surveillance, oil field surveillance and so on.

Technology
Standard	IEEE 802.11a/b/g for Wireless LAN IEEE 802.11i Wireless Security IEEE 802.3u for 10/100Base-TX IEEE 802.3af for Power over Ethernet IEEE802.1D Spanning Tree Protocol
Performance
CPU	IXP425, 533MHz
System Memory	16MB Flash 32MB SDRAM
Operating Frequency	5GHz Band: FCC* : 5.725~5.850 GHz CE** : 5.470~5.600 GHz; 5.650~5.725 GHz 2.4GHz Band: FCC : 2.412~2.462GHz CE : 2.412~2.472GHz (Programmable for different country regulations)
RF Modulation	802.11a: OFDM (BPSK, QPSK, 16-QAm, 64QAM) 802.11b/g: DSS (CCK, DQPSK, DBPSK)
RF Output Power (Max. of Avg.)	5GHz Band: 24dBm at Radio for FCC (Band 4) 30dB EIRP for ETSI 301 893 (Band3) 2.4GHz Band: 23dBm (Max. of Avg.) at Radio for FCC 20dB EIRP for CE (ETSI 300 328) (Controllable for different country regulations)
Sensitivity	5GHz Band: =-90dBm @6Mbps =-73dBm @54Mbps 2.4GHz Band: =-96dBm @1Mbps =-90dBm @6Mbps =-72dBm @54Mbps
Default Antenna Characteristics
Gain	23dBi
Frequency	5400~5850 MHz
Direction	Directional Antenna      Choose Antenna!
HPBW (Horizontal)	10 Deg.
HPBW (Vertical)	10 Deg.
Interface
Ethernet Port	1 x 10/100Base-T, Auto Negotiation
RS-232	RS-232 (UART) in RJ45 Form Factor For debug purpose P1: TXD0, P2: DSR0, P3: RXD0, P4: TXD1, P5: RXD1, P6: DTR1, P7:Hard Reset, P8:GND
Buzzer	Embedded buzzer for power on and Antenna Alignment indication
Reset Pin	Short P7 and P8 less than 1 sec. to reset system Short P7 and P8 less than 5 sec. to reset to factory default
Cables	2/4-pair UTP/STP Cat. 5 cable (100m)
Management
Management	Web UI (Secure SSL), Command Line Interface (SSH or RS-232 (9600)), Windows-based Utility, SNMPv2, DHCP Client, Configuration backup/restore
Statistics	Wireless and Ethernet Traffic statistics
Firmware upgrade	WWeb, Windows management tool, TFTP, firmware backup
Operating Mode	JetWave 2610/2640: Base Station, CPE, Point to Point, Point to Multiple Point JetWave 2620: Base Station, CPE, Relay, Point to Point, Point to Multiple Point
Radio Bandwidth Control	5MHz/10MHz/20MHz/40MHz
Super A/G	Fast Frames, Burst, Compression modes
TDM Coordination	Traffic management
Intel TDMA	For long distance transmission
Transmit Power Control	Adjust RF output power
Link Aggregation	To enhance Throughput with dual radio card (2620 only)
Distance in Meters	Auto ACK-Time adjustment
Wireless Isolation	Isolate Wireless data from clients
Antenna Alignment	Easy tool to align antenna performance
Link Test	Self-Wireless Connection test
Secured Access	HTTPS, SSH, 802.1x, Radius Server, Access Control by Trusted Wireless station, manually add station, MAC Address Authentication
Security Encryption	WEP 64/128/152 bits, WPA-PSK (TKIP), WPA2-PSK(AES), Mixed WPA/WPA2
STP	Spanning Tree Protocol with Fast Forwarding
NTP	Network Time Management
System Log	Log occurred events
Power Requirements
Power	Power over Ethernet, IEEE802.3af compliant
PoE Injector	Input: 100-240VAC, 0.6A 50-60Hz Output: 48V, 0.4A
Power Consumption	Above 6 Watts @ DC 48V, depend on user volume
Mechanical
Enclosure	IP-67 & Level 17 Beaufort Scale protection
Vent	Vent for exclude moisture
External Antenna connector	N-Type
Dimension	Box: 237 mm (H) x 237 mm (W) x 68 mm (D) Antenna: 320 mm (H) x 320 mm (W) x 18 mm (D)
Installation	Pole Mount (ADC-12 Aluminum alloy)
Weight	4.43 kg with package
Environmental
Operating Temperature	-30 to 70°C
Operating Humidity	10% to 95% (Non-condensing)
Storage Temperature	-40 to 85 °C
Regulatory Approvals
EMI	FCC part 15 Subpart B&C, CE EN301 893(5G)
EMS	CE EN301 489-1/17
Safety	UL, EN60950
Shock	IEC 60068-2-29
Free Fall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Warranty	Global 3 years